MARS Logo

Meewasin Amateur Radio Society
Saskatoon, Saskatchewan, Canada

VE5DR

Click here to learn about Canada's Greatest City!

Home
Club Events
Membership Information
Repeater Information
Repeater Frequencies
Technical Information
HF Remote Base
IRLP System
Nets
MARS System Status
Saskatchewan Provincial Link
Saskatchewan Repeater List
Links



Technical Information

tower1.JPG (45256 bytes)VE5SKN Repeater

The VE5SKN repeater consists of 4 separate sites. One being the main receiver site, second the main transmitter site, third and fourth are the North end and East side reciever. 

MAIN RECIEVER

This site is located in the SW corner of the city. The antennas at this site are a Diamond dual band vertical antenna and a Sinclair 210C4 antenna.  They are connected through a voting system to enable a better RX coverage.  The radio equipment consists of 2 Mitrek radios.

 

MAIN TRANSMITTER (Above Pic)

The main transmitter is located in the NW corner of the city. It is on a 30 foot using a Sinclair 210C4 antenna. The RF equipment includes a GE Master II VHF transmitter with 100W Micor Amp, a scanning UHF receiver unit. The telephone line is installed at this location with a dumb autopatch. All UHF signals transmitted by all three other sites are received at this location and retransmitted out on 145.210.  We are using Sinclair duplexers in this part of the system.

ve5sknnode2.JPG (84701 bytes)IRLP

The IRLP node is located at the transmitter location.  It is coupled directly with the VHF transmitter to ensure clean audio.

VOICEMAIL/NORTH END

This site is located in the north end of the city. The antennas are on a 30 foot Delhi tower. The RF equipment for the site consists of a GE Master II and a Motorola Mitrek. This is connected to a Cushcraft 6 element Yagi.  The voicemail is a DCI-100 running on a 386SX computer.

inside2.JPG (86454 bytes)EAST SIDE RX

The east side reciever is the most recent addition to the system.   It is located in the central east part of Saskatoon.  The RF equipment is a GE Exec II radio with a VHF reciever and UHF transmitter. 

All the identification is done in voice with the exception of the intermittent CW id on the transmitter. Digital audio delay boards may be added to the system for the purpose of DTMF muting and a more pleasant sounding audio with the elimination of the squelch crashes.

As time goes on the plans are to add more receiver sites throughout the rest of the city to further enhance the handheld range.

 

2001/11/09